Attachment for the
Camlock Belt System

Option 1: Easiest
If using a 5-point or 6-point system with camlock.

Option 2: For use when not using a 6-point or the opening in the bottom of the buckle.

Option 3: For use with the D-ring 6-point

Disclaimer

Option 1: Easiest
If using a 5-point or 6-point system with camlock.

Insert left lap belt tongue through the tongue on the Hutchens Device ™then into buckle.

(This configuration has been tested with no issues.)
Option 2: For use when not using a 6-point or the opening in the bottom of the buckle.

Requires the use of a Camlock tongue that can be webbed in place of the current tongue.The tongue is available from Simpson (upper torso Tongue for Camlock)or from BSR Products.

(Also known as a 6-point anchor.)
Option 3: For use with the D-ring 6-point.

If the customer is using a Formula style belt with D-rings on the lap belts.The harness can be modified by unlacing the tongue on the harness and making a loop at each end of the vertical straps.The loops then follow the 6-points through
the D-rings on the lap belts and up to the upper torso tongues to lock into the belt system.
As with any restraint system, replace after severe use.
Or after 2 years of use.

WARNING: THIS ARTICLE IS SOLD WITHOUT WARRANTY, EXPRESSED OR IMPLIED. NO WARRANTY OR REPRESENTATION IS MADE AS TO THIS PRODUCTS ABILITY TO PROTECT THE USER FROM ANY INJURY OR DEATH. THE USER ASSUMES THAT RISK.
©2004 Safety Solutions Inc. All Rights Reserved.







DISCLAIMER

Vehicle racing is an inherently dangerous sport with significant risk of person injury or even death. When a user participates in vehicle racing, he accepts the risk inherent therein. Safety Solution, Inc. makes no warranty that the use of its products or parts guarantees personal safety or freedom from physical injury or operates as a life saving device.

SAFETY SOLUTION, INC.’S PRODUCTS AND PARTS ARE SOLD “AS IS” WITHOUT ANY WARRANTY WHATSOEVER. EXPRESS WARRANTIES, IMPLIED WARRANTIES, WARRANTIES OF MERCHANTABILITY AND WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. THE ENTIRE RISK OF QULITY AND PERFORMANCE OF SUCH PRODUCTS AND PARTS IS WITH THE BUYER, USER SUBSEQUENT USER, OR AGENT THEREOF (HEREIN “USER”). SHOULD SUCH PRODUCTS OR PARTS PROVE DEFECTIVE FOLLOWING THEIR PURCHASE, THE BUYER AND NOT THE MANUFACTURE(S), DISCTRIBUTOR(S), OR RETAILER(S), ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICES OR REPAIR.

Safety Solution, Inc. disclaims all liability for any special, direct, incidental or consequential damages, or any damages whatsoever, including, without limitation, the loss of life or limb, or damages due to bodily or personal injury, which may arise or result from the sale, installation, or use of any of its products and parts.

It is the user’s responsibility to inspect and verify the dimensions, specifications, and performance of all products and parts as being appropriate for the use to which the user will put them prior to any actual installation and/or use of said products and parts.

Safety Solution, Inc.’s products and parts are to be inspected by the user before each use for evidence of damage, defect or wear. Any deviation by the user from the manufacturer’s specifications concerning use, maintenance, repair, alterations and modifications constitutes willful negligence.

The installation of Safety Solution, Inc.’s products or parts may adversely affect other vehicle components, safety equipment or manufactured goods (collectively “goods”). Safety Solution, Inc. assumes no responsibility for any damage to other goods, or bodily injury that may arise due to failure of other goods, due to installation and/or use, either proper or improper, of its products or parts.

The liability of Safety Solution, Inc. is limited to the replacement of defective products or parts found under examination by manufacturer to be defective in material or workmanship within 60 days after purchase, and which has not been caused by an accident, improper use, alteration, tampering, excessive use, misuse, modification or abuse. The damage of the user shall be deemed liquidated in the costs of replacement of the product or part.

Safety Solution, Inc. assumes no responsibility for errors, omissions, diagrams, pictures, illustrations or text in these instructions or the documents contained herewith.

By purchasing or using this product, the user agrees that if any provision of this Disclaimer is held to be illegal, invalid or unenforceable under present or future law, such provision shall be fully severed from the Disclaimer and this Disclaimer shall be construed and enforced as if such illegal, invalid or unenforceable provision never comprised a part hereof, and the remaining provisions hereof shall remain in full force and effect and shall not be affected by the illegal, invalid or unenforceable provision, there shall be added automatically as part of this Disclaimer a provision as similar in its terms to such illegal, invalid or unenforceable provision as may be possible and be legal, valid and enforceable.